Blog Lift chair controller: which one is the best?

Fri, 11/11/2022 - 17:27

hand controller

‌A lift chair is a motorized chair that allows you to stand and sit from one position to another. 

The devices are useful for people recovering from surgery and those with arthritis and neurological conditions that limit their movements. A remote control is used to operate a lift chair.

There is no doubt that lift chairs are the best solution when it comes to maintaining independence in a safe and comfortable setting. At the same time, these amazing chairs are comfortable and easy to use while providing support while sitting or standing. It only takes a press of a button on the hand control to find yourself sitting in absolute comfort and standing up with confidence! Hand controls are essential to making a lift chair work properly, and when they are damaged or broken, they can deter someone from using one.

Durable and long-lasting construction makes hand control a wise choice. The life span of a controller is determined by its use and handling. A controller's lifespan can be shortened if used aggressively and frequently, leading to damage. However, the aging process and the need to replace lift chair controllers cannot be stopped even with careful control handling. We've listed some options below to help you find the best lift chair, controllers. 

Pride Mobility Viva Lift Chair 10 button 5pin hand control remote

With a 10-button remote control for lifting and reclining, this hand control fits most Pride Mobility seat lift chairs. There are green outlined backlit buttons on the white face of this remote and a gray cord with a black back. In this hand control, two large white buttons with black arrows and white Pride Mobility logos replace the black remote control. Furthermore, this replaces the old gray remote with blue backlit buttons with a lock button.

Lock/unlock button 

For the hand control to be locked, press and hold the Lock/Unlock button for approximately 5 seconds. The Lock/Unlock button will illuminate when it is locked. The hand control buttons and LEDs will all flash, indicating that the hand control has been unlocked, and the Lock/Unlock Button will no longer be lit when you press and hold the Lock/Unlock button for approximately 10 seconds.

Massage button with mode 

A single press is all it takes to activate the massage option. When you push the button again, you'll be able to cycle through the modes (wave, steady, or pulse) indicated by the LEDs above the button. By pressing and holding the button, you can turn off the massage. It will turn off after 20 minutes on its own.

Memory buttons 

You must hold Memory Button 1 and Memory Button 2 for three (3) seconds. When the hand control is in the "set" mode, the LEDs on the memory buttons will flash. Set the memory position by pressing and holding the desired memory button for three (3) seconds. It will take a few seconds for the LEDs to stop flashing. By pressing and holding the desired memory button, you can go to a preset memory position.deluna lift chair golden technologies the best rental lift chair

Intensity button 

With a push of the button, you can cycle through the three levels of intensity indicated by the LEDs above the button (low, medium, and high).

Golden Technologies Lift Recliner Part Remote Hand Control

Each feature of Golden Tech's hand control has been designed to ensure individualized comfort and optimal wellness positioning, all accessible through easy-to-use features, making operating your recliner easy and comfortable. This remote has infinite positions and memory settings used on Golden chairs.

Easy-Grip Design

People with low hand strength will feel comfortable using the ergonomic shape, which has a tapered design with a bigger top and a thinner bottom. It has an indentation on its back for a finger grip, which helps hold the controller firmly in place in any hand. In addition to the "soft touch" finish, there is an enhanced grip with damp or dry skin due to the "soft touch" finish.

Button Programmability

The buttons on the AutoDrive hand control that make up the Position Control portion can be easily reprogrammed to find the perfect position each time.

SmartTek® Diagnostic System

An important part of the SmartTek system is the AutoDrive hand control, an electronic diagnostic system that visually communicates the recliner's electrical health. Looking at the hand control, the user will know immediately if power has been lost to the chair.

medium tall  lift chair golden technologies the best rental lift chair Quick Disconnect

It is not uncommon for hand controls to fall to the floor. If they aren't attached to the clip on the side of the chair, they can drop and be damaged. If necessary, hand control can be replaced with the quick disconnect feature.

Aside from its physical convenience features, the hand control also comes with a variety of functionality that can be accessed through various button sequences described in the owner's manual.

The lift chair's hand control full lockout option allows disabling all buttons. The user can enjoy patented comfort by simply pressing the Rise or Recline buttons by disabling the Position and Custom Control buttons.The light illuminating the buttons in the Lights Out feature is turned off.

Restoring the original factory settings for the Position Control buttons is achieved by using the Factory Default Reset button. The calibration process ensures accurate movement of your recliner and fine-tunes your positioning. You can find instructions in the Owner's Manual.

Programming the Memory Buttons S5, S6, S8 and S10

You can stop the chair by pressing one preprogrammed button (S5, S6, S8, S10). You can micro-adjust those positions by pressing buttons (S1 through S4). Once the chair is in your desired position, reprogram the (S5, S6, S8, and S10) buttons according to the instructions below. 

Using the program button (SP), press and hold it. When the backlight is pressed, it turns off. The backlight will flash once every three seconds. After pressing the memory button (S5, S6, S8, S10) for five seconds, the position will be saved. In this case, the backlight will not flash, indicating that the new position has been recorded. If you do not press a programmable memory button within 5 seconds or if you press a nonprogrammable button, then the programming sequence is aborted and must be repeated. The memory buttons may be reprogrammed as often as you like. 

ComfyRecline 6 Button Universal Remote Control for Lift Chairs with 5 Pin Plug

Stylish replacement lift chair power recliner with six buttons and a 90-angled five-pin power connector. A six-button system is included for adjusting the headrest, footrest, and backrest. There are six buttons to connect to the motor, up and down buttons for two engines, and five pins to connect to the motor. Working on lift chair motors for Okin, Limoss, Dewert, Kaidi, Mulin, FBS, and Golden brands. Compatible with a wide variety of lift chair and power recliner brands

The remote has a hook on the back, making it easy to use. There is a 180-degree angle plug at the end of the cord, which extends approximately 6.6 feet. Be sure to check your motor plug type before purchasing to avoid returns.

Bottom line 

If you look at the above-given options for lift chair controllers, the best one is from Golden Lift chairs company because it has the best Lift chair controller memory. The controller memory can save you time and energy working on the settings of the lift chair; you have to adjust the ground once 

Tags