The Joerns WeCare™ bed offers all the functions and stability of an institutional frame with an easy-to-deliver and assemble package. The split-frame design combines easy, one-person delivery with ultra-low bed height for fall prevention and a full range of options to deliver convenient, effective care in any environment.


Constructed for strength, this fully-electric bed provides smooth and quiet head, foot, and height positioning.

Delta® Ultra-Light 1000, Full-Electric Bed bed only

  • The Delta 1000 is truly universal because the bed frame can be used with Drive's and most other manufacturers’ bed ends, old and new
  • The transition box mounted on the foot section is key to interchangeability (Figure A)
  • The transition box allows you to change the rotation of the high/low shaft
  • The headboard is taller than the footboard to better fit home decor (Figure B)
  • The wood grain panels are break and scratch resistant
  • Foot section weighs 50% less than conventional foot sections to make deliveries safe and easy
  • Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations (Figure C)
  • Labels and color-coded springs ensure the accurate installation of side rails for patient safety (Figure D)
  • The unique motor is completely self-contained to reduce weight and noise
  • The motor assembly can be installed and removed with the patient in bed
  • Bed, side rails, and mattresses are safety-tested by SGS, a nationally recognized testing facility. Satisfies all applicable FDA entrapment guidelines
  • The motor is UL approved
  • In the event of a power failure, a 9-volt battery in the hand control can lower the head and foot sections nine times. No crank is needed
  • The new and improved hand pendant has large, easy-to-use controls (Figure E)
  • Bed ships in two cartons
  • Channel frame construction provides superior strength and reduced weight
  • Zinc-coated spring deck
  • The extension kit available (model #15030EXTKIT) extends length from 80" to 84"
  • Patent Pending
  • Weight Capacity 450 lbs

    Elevate the head or foot of the bed to promote peaceful rest


    Features a zero-gravity position to increase circulation and relieve pain


    Powerful dual motors smoothly and quietly elevate the bed frame to the desired position.


    Easily adjust the bed frame in dim and darkened rooms with the backlit wireless remote control.


    Includes a bed rail pouch with three mesh pockets as well as dual USB ports for conveniently powering electronic devices


    Sized to fit a twin or twin XL mattress, the adjustable electric bed frame is constructed with durable steel to support up to 350 pounds

      Aiding individuals when sitting up and getting in or out of bed is great for seniors & those recovering from injuries and surgery.
      For convenience, the handrail drops down for simple, out-of-the-way storage
      A strong, adjustable anchor strap secures the bedrail to the opposite side of the bed to prevent slipping and gaps
      Open fit design works with any size bed frame, including the king, California king, queen, full, and twin
      Creating a comfortable, nonslip grip, the bed rail handle is enclosed in a soft foam
      Easy to assemble, the durable aluminum rail quickly installs on any standard bed frame


    Premium Foam Mattress, 36" x 80" x 6"

    • Comfortable foam mattresses constructed with durable 8-oz. vinyl covers
    • Inverted side seams for patient comfort and caretaker convenience
    • One-year warranty



    Rails: 4-Bar Spring-Loaded Adjustable Full-Length Bed Rails

    4-Bar Spring-Loaded Adjustable Full-Length Bed Rails, 1 Pair / Case

    • Adjusts in length from 39.5" to 57.5" (100 to 146 cm)
    • Tool-free installation
    • Spring-loaded
    • One year warranty
    • Heavy-duty 1" chrome-plated, welded steel construction
    • Dual flat-channel cross braces are secured with wing-nut clamp assemblies (some assembly required)
    • For optimal safety and convenience, four half-length rails are recommended (one set for the head area and one set for the foot area)
    • Rails have 2 locked positions. Up and Down (Below the Mattress Line)
    • Additional Pair can be purchased for the Leg Section the bed.
    The Medline Full-Electric Bed has a simple, easy-to-use, heavy-duty control that allows you to position the head and foot sections for optimal comfort and raise and lower the overall bed height for the perfect size for entry and exit of the bed. Durable end panels and painted frames are designed to withstand everyday wear and tear, while an extra steel plate is welded to the middle to add strength and stability. It is also intended to help the patient and caregiver free from pinch point injuries. Optional upgrades include spring-loaded, adjustable side rails and various mattress options to accommodate many different users with varying budgets.

    Medline Full Electric Bed

    • Full Electric: Smooth, quiet DC electric motors, Medline Bed features premium LinakTM motors that provide smooth reliable operation. The hand pendant will raise and lower the bed's head, legs, and overall height.
    • Easy Assembly: Color Coded step-by-step assembly makes it simple for anyone to put together.
    • The strong and Durable bed has an extra steel plate welded to the middle of the frame, painted frames with an enamel finish and clear coat for a chip and scratch-resistant finish, plastic wood grain end panels, and heavy-duty remotes that resist breakage and moisture.
    • Safety First: Recessed headspring supports and foot assembly reduces the chance of pinching and injuries.
    • Standard Outlet: DC low-voltage, the compact motor system is faster, quieter, and lighter.
    • A quiet motor system with waterproof enclosures.
    • Fast Cycle Time for the lowering of the bed.
    • Ergonomic Remote Control comes with durable strain relief heavy-duty cord.
    • Battery Backup 9V battery backup for moving to the lowest position during power failures (batteries not included)
    • Locking Casters so the bed stays in place.
    • Bed Mattress System Med-Aire® Alternating Pressure / Low Air Loss 36 X 80 X 8 Inch Drive
    • Active mattress replacement system provides both alternating pressure and low air loss to optimize pressure redistribution, shear/friction reduction, and microclimate control
    • Designed to prevent, treat and heal pressure ulcers in the home or long-term care setting
    • The Control unit offers 10-minute cycles when alternating and can also be used in static mode.
    • Adjustable patient weight settings allow for optimal immersion and patient comfort & compliance.
    • Audio and Visual alarm alerts when air pressure is low
    • The system includes 20 individual air cells to maximize immersion and envelopment with a pillow feature for head stability & comfort
    • 8" deep air cells are easily removed and replaced with air leakage plugs
    • The removable Nylon stretch cover is fluid resistant, low shear, and vapor permeable, helping protect the skin from friction and moisture
    • CPR valve allows for rapid deflation
    • Tubing quickly and easily disconnects with EZ Lock/Quick Release design.
    • Designed for convenience for both patients and caregivers, including 4 smooth-rolling casters (2 lockings, 2 non-locking) for easy transport and an advanced remote with large buttons for patients
    • Headspring supports recessed to resist pinching and injuries; foot assembly recessed to reduce the chance of pinching
    • DC motor box snaps off quickly for easy delivery, setup, and routine maintenance; 9V battery backup for moving to the lowest position during power failures
    • Mattress, side rails, and batteries not included
    • Beds have a limited lifetime warranty on the frame and welds, and a 2-year warranty on mechanical parts and electronics
    • Maximum height of 26" for easy resident access; low height of 7.25" for Alzheimer's patients and any other resident at risk of falling
    • Smooth performance with four ultra-quiet, dependable DC motors: two for height, one for knee hinge, and one for reclining head deck
    • Grid and rib combination deck design provides comfort and strength
    • Bed deck dimensions: 80" L x 34.5" W; 87.5" overall length
    • Battery backup not included
    • Alterra™ 1130 Economic, high-low, full-electric bed Item number Description FCE1130B Alterra 1130B high-low bed only FCE1130SRQO Alterra 1130 bed package (Includes Alterra 1130 bed, soft-touch side rails, head/ footboards, in traditional style, solar oak finish, and mounting hardware) FCE1232HDW Mounting hardware for head and footboards Cost-effective Provides positioning comfort with independent and simultaneous operation of the head, knee, and hi-low functions. A strong, well-built, low-maintenance electric bed is suitable for most residents in long-term care facilities. Resident safety A low height of only 7.25" helps reduce injuries from falling with high-risk patients. All Alterra beds meet the entrapment guidelines of the FDA. Performance Lightweight bed was built for ease of use and transport. Smooth performance with ultra-quiet, dependable DC motors that operate without horizontal movement eliminates wall damage. Wall guards, mattress retainers, and stability knobs for the headboard and footboard come standard.

    For patients who have difficulty getting out of bed. Durable molded plastic construction & conventional style. Odor-resistant & easy to clean.

    • Tapered lower front for easier patient positioning
    • Durable molded plastic
    • Construction and conventional style
    • Odor-resistant and easy to clean
    • Latex-free

    • Easy to assemble
    • Twin-wheel swivel casters provide smooth-rolling action. Two locking and two non-locking casters
    • Walnut, wood-grain laminated particle-board core with plastic edge molding
    • Chrome plated or Silvervein hammertone finish "H" base and column for aesthetics and durability
    • Designed to meet the requirements of HCPCS code: E0274

    • Warranty: One (1) Year


    Easy assembly.

    • Chrome-plated, welded tubular steel column and base provide durability and stability.
    • 1 ½" hooded, ball-bearing casters ensure easy maneuverability across all floor surfaces.
    • Table top, constructed of wood-grained oak Melamine laminate on particle-board core, adjusts 13" in infinite positions.
    • Raised T-molded plastic edge.
    • Chrome-plated “H” base and column for aesthetics and durability.
    • 2 locking casters.
    • Designed to meet the requirements of HCPCS code: E0274.
    • Supports up to 30 lb of dispersed weight.
    • One year warranty. 

    • Table Dimensions: 30” L x 15” W
    • Base Dimensions: 26.25” L x 15.38” W
    • Height Adjustment: 28.25” x 44.75” (table to the ground)
    • Weight Capacity: 22 lb
    • Weight: 27.6 lb


    PREVENT FALLS: Assist handle allows for easy transfers in and out of bed
    INSTALLATION: Secures to bed frame with included safety strap
    STRONG: Bariatric use with weight capacity at 400 lbs
    POUCH: Included organizer pouch to keep handy items close by
    BED TYPES: Works with traditional beds with mattresses 6″-15″ thick
    COMPATIBILITY: Not intended for use on adjustable beds

    • Rail Height: 18.75″
    • Rail Width: 10.5″
    • Base Dimensions: 19.5″ x 28.5″
    • Product Weight: 12.35 lbs
    • Weight Capacity: 400 lbs
    • Made for Bed Type: Fits 6″–15″ mattress
    • Package Dimension: 21.25″ x 32″ x 4.25″
    • Case of 2 Dimensions: 22″ x 32.5″ x 9″
    • Case Weight: 28.2 lbs